Table of Contents
3Shape Communicate for labs: how cases and files arrive
To receive a 3Shape Communicate case, a lab on 3Shape Dental System refreshes the Communicate inbox so the case comes in, then accepts it. The practice sees the acceptance. For labs without Dental System, we found no public description from 3Shape of how to get the files.
Looking for the sign-in? That’s on 3Shape’s Communicate page.
What’s in a case
A case has an Rx (the order form, or prescription), the scans and comments. The Communicate portal shows it in a browser with a 3D viewer, and you can search by patient, collaborator, case state or date range.
Read the Rx first. A scan can look perfect and still be for the wrong tooth.
A good scan set usually has three parts: the prepared tooth, the opposing arch and the bite registration. For implant cases, add the scan body. If something’s missing, you’ll find out at the design step at the latest. Catching it at intake is cheaper.
Receiving a case in Dental System
This follows 3Shape’s own description of a TRIOS case. The practice scans and sends the case. In Dental System, your lab refreshes the Communicate inbox so the case comes in, then accepts it, and the practice can see that you accepted it. When the design is done, you send it back to the practice. If the practice is asked to approve the design, it can approve or reject it, and a rejected design comes back to you for changes.
If the inbox won’t show a case or won’t let you accept it, you can download the order manually with Dental System 2018 or newer. Copy the case ID from the portal, open the Advanced Download Tool on the 3Shape Communicate Inbox tab in Dental Manager, paste the ID and click Receive. Then accept the case in the inbox as usual.
If your lab doesn’t use Dental System
This is a gap in the public information. 3Shape documents the route through Dental System and shows the case in the portal. It doesn’t describe how a lab without Dental System gets the scan files out of Communicate. Ask 3Shape or your reseller a concrete question: “We design in other CAD software. How do we get the scan files for a TRIOS case that a practice sends us, and in which format?”
The other route is lab software with its own connection to Communicate. Crownbeam is one example, and the integrations page lists what we connect to.
DCM, STL and PLY
| Format | What it is | Color | Use |
|---|---|---|---|
| DCM | 3Shape’s native format | Keeps the original scan colors | Keep it as the original |
| STL | Open format | One color, original scan quality | Hand to other CAD software |
| PLY | Like STL, with adapted colors, from Dental System 2021 | Adapted colors | When you want color in an STL-style file |
You export STL and PLY from 3Shape software: in Dental Manager, right-click the order, then Advanced, then Export Scan. Preparation, opposing arch and bite can go out as separate files, or as one file that keeps the occlusion. For TRIOS scans, the STL export needs the “TRIOS Scan STL Export” option on your license dongle (the USB key that holds your 3Shape licenses).
Can you convert DCM to STL?
Not with third-party software. DCM is a proprietary 3Shape format, and 3Shape says conversion to STL can’t be done outside its own software. That page is about lab scans made with ScanIt, so it’s not a perfect match for TRIOS scans. Export STL from 3Shape software and keep the DCM.
Check before you accept
A short check per case costs less than a remake.
- Rx against scans: tooth, restoration type, shade, due date.
- Prepared tooth, opposing arch and bite registration all there.
- The margin. Look for a margin that isn’t captured all the way around, or one covered by blood, saliva or retraction cord. If you can’t see it, say so now.
- A question? Ask in the case, not by phone a day later. We wrote about why calls pile up between practices and labs.
When a case doesn’t show up in Dental System
Refresh the inbox first. If that doesn’t help, use the case ID and the Advanced Download Tool.
If your lab software fetches the scans
If your lab software pulls scans from the portals directly and they stop arriving, check three things in this order: that a lab account is connected, not a clinic account; that the connection is still active; and which practice each scanner is assigned to.
Scans that land with the wrong customer or twice can come down to the assignment: a lab’s own scanner assigned to a practice, two practices sharing one scanner, the treating dentist’s name spelled two ways, or a practice that also places the order in the lab’s online order portal.
Either way, read the Rx before you start. It says which tooth and which restoration.
Unite Cloud and newer TRIOS practices
3Shape names Communicate as its collaboration service for TRIOS customers up to Unite 23.1 and for labs on Dental System. For TRIOS customers on Unite 24.1 and newer it names Unite Cloud, rolled out step by step. What that means for the cases you receive depends on the practice, so ask which version they run.
Where Crownbeam fits
With Crownbeam, the lab links a practice’s scanner user to that practice once. If the practice sends through 3Shape Communicate, each new scan from it shows up right away as a case with the scan files, the order sheet from the portal, the patient’s appointment and any photos sent along. The lab accepts each case with one click from the order sheet.
STL and PLY open in the browser without an extra program. DCM files can come along for download. Scans from Medit Link and DS Core arrive in the same place. See Crownbeam for dental labs.
Want to see scans from 3Shape Communicate, Medit Link and DS Core land in one place? Watch the demo video.
Frequently asked questions
How do I download a case from 3Shape Communicate?
In Dental System, refresh the Communicate inbox and receive the case. If it doesn’t appear, copy the case ID from the portal and use the Advanced Download Tool in Dental Manager. For labs without Dental System, we found no public route from 3Shape, so ask them or your reseller.
What is 3Shape Communicate?
It’s 3Shape’s service for sharing cases between practices and labs, with a web portal and an app. 3Shape names it for TRIOS customers up to Unite 23.1 and for labs on Dental System; newer TRIOS versions move to Unite Cloud.
How do I send a 3Shape scan to a lab?
The practice scans the case on TRIOS and sends it to its lab through 3Shape Communicate. A lab on Dental System then refreshes its Communicate inbox, the case comes in, and the lab accepts it (3Shape’s description).